Solplanet AI-Dongle LAN (local HTTP API)

← Sol, batteri, elnet, målere

Uses the AI-Dongle local HTTP API (e.g. BA121T-30) instead of Modbus TCP. The inverter serial number (isn) can be read via http://<host>:8484/getdev.cgi?device=2. Battery control charge power is fixed at 5000 W.

Understøttede funktioner

Batteristyring: Ekstern styring af opladning og afladning af hjemmebatteriet via evcc.

Anvendelsesområder

Elnetsmåler
Solproduktion
Batteri

Parametre

Navn	Beskrivelse	Niveau
`host`	IP address or hostname Eksempel: `192.0.2.2`	valgfri
`serial`	Inverter serial number (isn)	valgfri
`capacity` [kWh]	Battery capacity Eksempel: `50`	valgfri
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Standard: `0` Eksempel: `25`	valgfri
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Standard: `100` Eksempel: `95`	valgfri
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.	avanceret
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.	avanceret

Konfigurationseksempel til evcc.yaml

Hvis du ikke vil konfigurere via webgrænsefladen, kan du i stedet bruge denne YAML-blok.

ElnetsmålerSolproduktionBatteri

meters:
    - name: my_grid
      type: template
      template: solplanet-ai-dongle
      usage: grid
      host: 192.0.2.2 # IP address or hostname
      serial: # Inverter serial number (isn)

meters:
    - name: my_pv
      type: template
      template: solplanet-ai-dongle
      usage: pv
      host: 192.0.2.2 # IP address or hostname
      serial: # Inverter serial number (isn)

meters:
    - name: my_battery
      type: template
      template: solplanet-ai-dongle
      usage: battery
      host: 192.0.2.2 # IP address or hostname
      serial: # Inverter serial number (isn)
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)