TinkerForge WARP2 Smart

← Chargeurs Aucun jeton de parrain requis

If necessary, WARP3's/WARP4's own automatic phase switching will be deactivated by EVCC when connecting to the wallbox (see docs.warp-charger.com). Phase switching (1p/3p) is only possible on the WARP2 with an additional WARP Energy Manager, and not possible at all on the WARP1, since it does not support CP separation. RFID on the WARP1 is only available if an NFC Bricklet has been retrofitted. On the WARP4, EVCC can identify the vehicle by its MAC address if "Autocharge" or "Read state of charge" is enabled in the wallbox's ISO 15118 settings. Reading the vehicle SoC via ISO 15118 requires "Read state of charge" and is only available on the WARP4 Pro, since it needs the built-in energy meter. The ISO 15118 features require WARP4 firmware 2.12.2 or later.

Fonctionnalités prises en charge

RFID: Lecteur de cartes RFID intégré pour l’identification du véhicule.
Régulation en mA: Régulation plus fine du courant de charge (mA au lieu de A) pour mieux exploiter le surplus solaire.
Modulable: La puissance consommée peut être réduite (p. ex. § 14a EnWG). Voir Limite externe.

Paramètres

Nom	Description	Niveau
`uri`	URI HTTP(S) address	facultatif
`user`	Username e.g. email address, user id, etc.	facultatif
`password`	Password Service account password	facultatif
`energyMeterIndex`	Energy Meter Index Index of the meter configured in the WARP charger whose values should be used. Par défaut: `0`	avancé

Exemple de configuration pour evcc.yaml

Si vous ne souhaitez pas passer par l’interface, vous pouvez utiliser ce bloc YAML à la place.

chargers:
    - name: my_charger
      type: template
      template: tinkerforge-warp-ws
      uri: # URI, HTTP(S) address
      user: # Username, e.g. email address, user id, etc. (optional)
      password: # Password, Service account password (optional)
      energyMeterIndex: 0 # Energy Meter Index, Index of the meter configured in the WARP charger whose values should be used. (optional)