enecess ecoMain

← Solaire, batterie, réseau, compteurs

Grid metering uses the ecoMain main circuit; PV, charging, and auxiliary metering can use branch channels on the ecoMain or an ecoSub.

Requires ecoMain firmware 139 or later.

Domaines d’utilisation

Compteur avant réseau
Production solaire
Compteur du chargeur
Consommateur intelligent

Paramètres

Nom	Description	Valeur	Niveau
`id`	ID Modbus Par défaut: `1`	int	obligatoire
`host`	Adresse IP ou nom d’hôte Exemple: `192.0.2.2`		obligatoire
`port`	Port Par défaut: `502`	int	obligatoire
`phasecount`	Number of phases For single-phase metering, configure phase 1 only. For three-phase metering, also configure phases 2 and 3. Par défaut: `1`		facultatif
`device1`	Device (phase 1) Selects the device to which the CT for phase 1 is connected. 0 = ecoMain, 1–3 = ecoSub. Par défaut: `0`		facultatif
`channel1`	Meter channel (phase 1) Selects the meter channel to which the CT for phase 1 is connected. Par défaut: `1`		facultatif
`invert1`	Invert direction (phase 1) Enable if the power for phase 1 is measured with the opposite sign. Par défaut: `false`		facultatif
`device2`	Device (phase 2) Only required for three-phase measurement. Selects the device to which the CT for phase 2 is connected. 0 = ecoMain, 1–3 = ecoSub. Exemple: `0`		facultatif
`channel2`	Meter channel (phase 2) Only required for three-phase measurement. Selects the meter channel to which the CT for phase 2 is connected. Exemple: `2`		facultatif
`invert2`	Invert direction (phase 2) Enable if the power for phase 2 is measured with the opposite sign. Par défaut: `false`		facultatif
`device3`	Device (phase 3) Only required for three-phase measurement. Selects the device to which the CT for phase 3 is connected. 0 = ecoMain, 1–3 = ecoSub. Exemple: `0`		facultatif
`channel3`	Meter channel (phase 3) Only required for three-phase measurement. Selects the meter channel to which the CT for phase 3 is connected. Exemple: `3`		facultatif
`invert3`	Invert direction (phase 3) Enable if the power for phase 3 is measured with the opposite sign. Par défaut: `false`		facultatif

Exemple de configuration pour evcc.yaml

Si vous ne souhaitez pas passer par l’interface, vous pouvez utiliser ce bloc YAML à la place.

Compteur avant réseauProduction solaireCompteur du chargeurConsommateur intelligent

meters:
    - name: my_grid
      type: template
      template: enecess-ecomain
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_pv
      type: template
      template: enecess-ecomain
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port
      phasecount: 1 # Number of phases, For single-phase metering, configure phase 1 only. For three-phase metering, also configure phases 2 and 3. [1, 3]
      device1: 0 # Device (phase 1), Selects the device to which the CT for phase 1 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3]
      channel1: 1 # Meter channel (phase 1), Selects the meter channel to which the CT for phase 1 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
      invert1: false # Invert direction (phase 1), Enable if the power for phase 1 is measured with the opposite sign. (optional)
      device2: 0 # Device (phase 2), Only required for three-phase measurement.  Selects the device to which the CT for phase 2 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3] (optional)
      channel2: 2 # Meter channel (phase 2), Only required for three-phase measurement.  Selects the meter channel to which the CT for phase 2 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] (optional)
      invert2: false # Invert direction (phase 2), Enable if the power for phase 2 is measured with the opposite sign. (optional)
      device3: 0 # Device (phase 3), Only required for three-phase measurement.  Selects the device to which the CT for phase 3 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3] (optional)
      channel3: 3 # Meter channel (phase 3), Only required for three-phase measurement.  Selects the meter channel to which the CT for phase 3 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] (optional)
      invert3: false # Invert direction (phase 3), Enable if the power for phase 3 is measured with the opposite sign. (optional)

meters:
    - name: my_charger
      type: template
      template: enecess-ecomain
      usage: charge

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port
      phasecount: 1 # Number of phases, For single-phase metering, configure phase 1 only. For three-phase metering, also configure phases 2 and 3. [1, 3]
      device1: 0 # Device (phase 1), Selects the device to which the CT for phase 1 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3]
      channel1: 1 # Meter channel (phase 1), Selects the meter channel to which the CT for phase 1 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
      invert1: false # Invert direction (phase 1), Enable if the power for phase 1 is measured with the opposite sign. (optional)
      device2: 0 # Device (phase 2), Only required for three-phase measurement.  Selects the device to which the CT for phase 2 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3] (optional)
      channel2: 2 # Meter channel (phase 2), Only required for three-phase measurement.  Selects the meter channel to which the CT for phase 2 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] (optional)
      invert2: false # Invert direction (phase 2), Enable if the power for phase 2 is measured with the opposite sign. (optional)
      device3: 0 # Device (phase 3), Only required for three-phase measurement.  Selects the device to which the CT for phase 3 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3] (optional)
      channel3: 3 # Meter channel (phase 3), Only required for three-phase measurement.  Selects the meter channel to which the CT for phase 3 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] (optional)
      invert3: false # Invert direction (phase 3), Enable if the power for phase 3 is measured with the opposite sign. (optional)

meters:
    - name: my_aux
      type: template
      template: enecess-ecomain
      usage: aux

      # Modbus TCP
      modbus: tcpip
      id: 255
      host:  # Hostname
      port: 502 # Port
      phasecount: 1 # Number of phases, For single-phase metering, configure phase 1 only. For three-phase metering, also configure phases 2 and 3. [1, 3]
      device1: 0 # Device (phase 1), Selects the device to which the CT for phase 1 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3]
      channel1: 1 # Meter channel (phase 1), Selects the meter channel to which the CT for phase 1 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
      invert1: false # Invert direction (phase 1), Enable if the power for phase 1 is measured with the opposite sign. (optional)
      device2: 0 # Device (phase 2), Only required for three-phase measurement.  Selects the device to which the CT for phase 2 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3] (optional)
      channel2: 2 # Meter channel (phase 2), Only required for three-phase measurement.  Selects the meter channel to which the CT for phase 2 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] (optional)
      invert2: false # Invert direction (phase 2), Enable if the power for phase 2 is measured with the opposite sign. (optional)
      device3: 0 # Device (phase 3), Only required for three-phase measurement.  Selects the device to which the CT for phase 3 is connected. 0 = ecoMain, 1–3 = ecoSub. [0, 1, 2, 3] (optional)
      channel3: 3 # Meter channel (phase 3), Only required for three-phase measurement.  Selects the meter channel to which the CT for phase 3 is connected. [1, 2, 3, 4, 5, 6, 7, 8, 9, 10] (optional)
      invert3: false # Invert direction (phase 3), Enable if the power for phase 3 is measured with the opposite sign. (optional)