Fronius Solar API V1

Solar API should only be used as fallback. Integration via Modbus is preferred.

Username and password are only required for active battery control.

Attention: Active battery control should only be used if no other settings for time-dependent battery control were made in the inverter configuration under "Energy Management" - "Battery Management", as existing settings will be overwritten. Choose corresponding configuration URI!

Fonctionnalités prises en charge

Pilotage de la batterie: Pilotage externe de la charge et de la décharge de la batterie domestique par evcc.

Domaines d’utilisation

Compteur avant réseau
Production solaire
Batterie

Paramètres

Nom	Description	Niveau
`host`	IP address or hostname Exemple: `192.0.2.2`	facultatif
`user`	Username (for active battery control) e.g. email address, user id, etc. Par défaut: `customer`	facultatif
`password`	Password (for active battery control) Service account password	facultatif
`capacity` [kWh]	Battery capacity Exemple: `50`	facultatif
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Par défaut: `0` Exemple: `25`	facultatif
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and for grid charging. Par défaut: `100` Exemple: `95`	facultatif
`batteryconfiguri`	Battery configuration URI Firmware starting with 1.36.5-1 requires /api/config. Par défaut: `/config`	avancé
`maxchargepower` [W]	Maximum charge power For forced charging of the battery.	avancé
`maxdischargepower` [W]	Maximum discharge power Maximum discharge power of the storage.	avancé
`cache`	Cache Time interval for data refresh Par défaut: `1s` Exemple: `5m`	avancé

Exemple de configuration pour evcc.yaml

Si vous ne souhaitez pas passer par l’interface, vous pouvez utiliser ce bloc YAML à la place.

Compteur avant réseauProduction solaireBatterie

meters:
    - name: my_grid
      type: template
      template: fronius-solarapi-v1
      usage: grid
      host: 192.0.2.2 # IP address or hostname
      user: customer # Username (for active battery control), e.g. email address, user id, etc. (optional)
      password: # Password (for active battery control), Service account password (optional)
      batteryconfiguri: /config # Battery configuration URI, Firmware starting with 1.36.5-1 requires /api/config. [/config, /api/config] (optional)
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_pv
      type: template
      template: fronius-solarapi-v1
      usage: pv
      host: 192.0.2.2 # IP address or hostname
      user: customer # Username (for active battery control), e.g. email address, user id, etc. (optional)
      password: # Password (for active battery control), Service account password (optional)
      batteryconfiguri: /config # Battery configuration URI, Firmware starting with 1.36.5-1 requires /api/config. [/config, /api/config] (optional)
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_battery
      type: template
      template: fronius-solarapi-v1
      usage: battery
      host: 192.0.2.2 # IP address or hostname
      user: customer # Username (for active battery control), e.g. email address, user id, etc. (optional)
      password: # Password (for active battery control), Service account password (optional)
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and for grid charging. (optional)
      batteryconfiguri: /config # Battery configuration URI, Firmware starting with 1.36.5-1 requires /api/config. [/config, /api/config] (optional)
      maxchargepower: # Maximum charge power (W), For forced charging of the battery. (optional)
      maxdischargepower: # Maximum discharge power (W), Maximum discharge power of the storage. (optional)
      cache: 1s # Cache, Time interval for data refresh (optional)

Voir la version nightly