Fronius Primo GEN24 Plus

← Solaire, batterie, réseau, compteurs

To use active charge control, the Energy Cost Assistant (ECA) must not be activated in Fronius Solar.web. (Fronius Solar.web -> Settings -> Operating Mode -> Self-Consumption) Meter address of primary or secondary meters: on the web interface of the inverter, only the address of the first meter (e.g., 200) can be set. Additional meters receive an ascending number (e.g., 201).

Fonctionnalités prises en charge

Pilotage de la batterie: Pilotage externe de la charge et de la décharge de la batterie domestique par evcc.
Bridable: La production de l’onduleur peut être réduite (p. ex. § 9 EEG). Voir Limite externe.

Domaines d’utilisation

Compteur avant réseau
Production solaire
Batterie

Paramètres

Nom	Description	Valeur	Niveau
`id`	ID Modbus Par défaut: `1`	int	obligatoire
`host`	Adresse IP ou nom d’hôte Exemple: `192.0.2.2`		obligatoire
`port`	Port Par défaut: `502`	int	obligatoire
`capacity` [kWh]	Battery capacity Exemple: `50`		facultatif
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Par défaut: `0` Exemple: `25`		facultatif
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Par défaut: `100` Exemple: `95`		facultatif
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.		avancé
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.		avancé
`maxchargerate` [%]	Maximum charge rate For forced charging of the battery in percent in relation to the maximum charge power of the battery inverter. Par défaut: `100`		avancé

Exemple de configuration pour evcc.yaml

Si vous ne souhaitez pas passer par l’interface, vous pouvez utiliser ce bloc YAML à la place.

Compteur avant réseauProduction solaireBatterie

meters:
    - name: my_grid
      type: template
      template: fronius-gen24
      usage: grid

      # Modbus TCP
      modbus: tcpip
      id: 200
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_pv
      type: template
      template: fronius-gen24
      usage: pv

      # Modbus TCP
      modbus: tcpip
      id: 200
      host:  # Hostname
      port: 502 # Port

meters:
    - name: my_battery
      type: template
      template: fronius-gen24
      usage: battery

      # Modbus TCP
      modbus: tcpip
      id: 200
      host:  # Hostname
      port: 502 # Port
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)
      maxchargerate: 100 # Maximum charge rate (%), For forced charging of the battery in percent in relation to the maximum charge power of the battery inverter. (optional)