SMA Smart Energy Hybrid Inverter (Speedwire)

For active battery control use the Modbus-based SMA Smart Energy Hybrid Inverter template instead.

Domaines d’utilisation

Compteur avant réseau
Production solaire
Batterie

Paramètres

Nom	Description	Niveau
`host`	IP address or hostname Exemple: `192.0.2.2`	facultatif
`password`	Password Password for user group Standard	facultatif
`capacity` [kWh]	Battery capacity Exemple: `50`	facultatif
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Par défaut: `0` Exemple: `25`	facultatif
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Par défaut: `100` Exemple: `95`	facultatif
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.	avancé
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.	avancé

Exemple de configuration pour evcc.yaml

Si vous ne souhaitez pas passer par l’interface, vous pouvez utiliser ce bloc YAML à la place.

Production solaireBatterieCompteur avant réseau

meters:
    - name: my_pv
      type: template
      template: sma-hybrid-speedwire
      usage: pv
      host: 192.0.2.2 # IP address or hostname
      password: # Password, Password for user group Standard (optional)

meters:
    - name: my_battery
      type: template
      template: sma-hybrid-speedwire
      usage: battery
      host: 192.0.2.2 # IP address or hostname
      password: # Password, Password for user group Standard (optional)
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)

meters:
    - name: my_grid
      type: template
      template: sma-hybrid-speedwire
      usage: grid
      host: 192.0.2.2 # IP address or hostname
      password: # Password, Password for user group Standard (optional)