Solplanet AI-Dongle LAN (local HTTP API)

← Solaire, batterie, réseau, compteurs

Uses the AI-Dongle local HTTP API (e.g. BA121T-30) instead of Modbus TCP. The inverter serial number (isn) can be read via http://<host>:8484/getdev.cgi?device=2. Battery control charge power is fixed at 5000 W.

Fonctionnalités prises en charge

Pilotage de la batterie: Pilotage externe de la charge et de la décharge de la batterie domestique par evcc.

Domaines d’utilisation

Compteur avant réseau
Production solaire
Batterie

Paramètres

Nom	Description	Niveau
`host`	IP address or hostname Exemple: `192.0.2.2`	facultatif
`serial`	Inverter serial number (isn)	facultatif
`capacity` [kWh]	Battery capacity Exemple: `50`	facultatif
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Par défaut: `0` Exemple: `25`	facultatif
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Par défaut: `100` Exemple: `95`	facultatif
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.	avancé
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.	avancé

Exemple de configuration pour evcc.yaml

Si vous ne souhaitez pas passer par l’interface, vous pouvez utiliser ce bloc YAML à la place.

Compteur avant réseauProduction solaireBatterie

meters:
    - name: my_grid
      type: template
      template: solplanet-ai-dongle
      usage: grid
      host: 192.0.2.2 # IP address or hostname
      serial: # Inverter serial number (isn)

meters:
    - name: my_pv
      type: template
      template: solplanet-ai-dongle
      usage: pv
      host: 192.0.2.2 # IP address or hostname
      serial: # Inverter serial number (isn)

meters:
    - name: my_battery
      type: template
      template: solplanet-ai-dongle
      usage: battery
      host: 192.0.2.2 # IP address or hostname
      serial: # Inverter serial number (isn)
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)