1SINQ OneKey

← Opvarmning

OneKey heating controller with evcc integration enabled. The heat pump is controlled via SG Ready states (1=dim, 2=normal, 3=boost). The device's energy manager must run in SG Ready mode with evcc selected as the SG Ready source. When evcc runs on the OneKey device itself the broker is localhost.

Understøttede funktioner

Indbygget måler: Understøttelse af en integreret måler.
Kan nedreguleres: Effektforbruget kan reduceres (f.eks. § 14a EnWG). Se Ekstern grænse.

Parametre

Navn	Beskrivelse	Niveau
`host`	IP address or hostname IP address or hostname of the MQTT broker Eksempel: `192.0.2.2`	valgfri
`port`	Port MQTT broker port Standard: `1883`	valgfri
`topic`	Base topic of the OneKey device Topic (omit leading /) Standard: `onekey`	valgfri
`timeout`	Timeout When a reading counts as stale — default 90 s, three times the device's 30 s heartbeat Standard: `90s` Eksempel: `10s`	valgfri
`user`	Username e.g. email address, user id, etc.	avanceret
`password`	Password Service account password	avanceret

Konfigurationseksempel til evcc.yaml

Hvis du ikke vil konfigurere via webgrænsefladen, kan du i stedet bruge denne YAML-blok.

chargers:
    - name: my_heating
      type: template
      template: onekey
      host: 192.0.2.2 # IP address or hostname, IP address or hostname of the MQTT broker
      port: 1883 # Port, MQTT broker port (optional)
      topic: onekey # Base topic of the OneKey device, Topic (omit leading /) (optional)
      timeout: 90s # Timeout, When a reading counts as stale — default 90 s, three times the device's 30 s heartbeat (optional)
      user: # Username, e.g. email address, user id, etc. (optional)
      password: # Password, Service account password (optional)