1SINQ OneKey

← Opvarmning

Denne side viser nightly-versionen. Skift til release-versionen.

OneKey heating controller with evcc integration enabled. The heat pump is controlled via SG Ready states (1=dim, 2=normal, 3=boost). The device's energy manager must run in SG Ready mode with evcc selected as the SG Ready source. When evcc runs on the OneKey device itself the broker is localhost.

Understøttede funktioner

• Indbygget måler: Understøttelse af en integreret måler.
• Kan nedreguleres: Effektforbruget kan reduceres (f.eks. § 14a EnWG). Se Ekstern grænse.

Parametre

Navn	Beskrivelse	Værdi	Niveau
host	IP address or hostname IP address or hostname of the MQTT broker Eksempel: 192.0.2.2		valgfri
port	Port MQTT broker port Standard: 1883		valgfri
topic	Base topic of the OneKey device Topic (omit leading /) Standard: onekey		valgfri
timeout	Timeout When a reading counts as stale — default 90 s, three times the device's 30 s heartbeat Standard: 90s Eksempel: 10s		valgfri
user	Username e.g. email address, user id, etc.		avanceret
password	Password Service account password		avanceret

Konfigurationseksempel til evcc.yaml

Hvis du ikke vil konfigurere via webgrænsefladen, kan du i stedet bruge denne YAML-blok.

chargers:
    - name: my_heating
      type: template
      template: onekey
      host: 192.0.2.2 # IP address or hostname, IP address or hostname of the MQTT broker
      port: 1883 # Port, MQTT broker port (optional)
      topic: onekey # Base topic of the OneKey device, Topic (omit leading /) (optional)
      timeout: 90s # Timeout, When a reading counts as stale — default 90 s, three times the device's 30 s heartbeat (optional)
      user: # Username, e.g. email address, user id, etc. (optional)
      password: # Password, Service account password (optional)