Sonnen sonnenBatterie

← Sol, batteri, elnet, målere

For active battery control, the "JSON Write API" must be activated via the sonnenBatterie web interface (under Software-Integration) and the API token generated there must be entered in the battery configuration under token. The two operating modes supported for the sonnenBatterie are "self-consumption" (default) and "time-of-use". The mode can be adapted to the configuration of the sonnenBatterie via the 'defaultmode' parameter. The power for grid charging can be adapted to the inverter power of the sonnenBatterie via the maxchargepower parameter.

Understøttede funktioner

Batteristyring: Ekstern styring af opladning og afladning af hjemmebatteriet via evcc.

Anvendelsesområder

Elnetsmåler
Solproduktion
Batteri

Parametre

Navn	Beskrivelse	Niveau
`host`	IP address or hostname Eksempel: `192.0.2.2`	valgfri
`defaultmode`	Default mode for battery control Inverter falls back to this mode after charging the battery or after stopping discharge. Standard: `self-consumption`	valgfri
`port`	Port Standard: `8080`	valgfri
`capacity` [kWh]	Battery capacity Eksempel: `50`	valgfri
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Standard: `0` Eksempel: `25`	valgfri
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Standard: `100` Eksempel: `95`	valgfri
`token`	Token API Token (required for active battery control)	valgfri
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. Standard: `3300`	avanceret
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.	avanceret
`cache`	Cache Time interval for data refresh Standard: `1s` Eksempel: `5m`	avanceret

Konfigurationseksempel til evcc.yaml

Hvis du ikke vil konfigurere via webgrænsefladen, kan du i stedet bruge denne YAML-blok.

ElnetsmålerSolproduktionBatteri

meters:
    - name: my_grid
      type: template
      template: sonnenbatterie
      usage: grid
      host: 192.0.2.2 # IP address or hostname
      port: 8080 # Port, optional
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_pv
      type: template
      template: sonnenbatterie
      usage: pv
      host: 192.0.2.2 # IP address or hostname
      port: 8080 # Port, optional
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_battery
      type: template
      template: sonnenbatterie
      usage: battery
      host: 192.0.2.2 # IP address or hostname
      defaultmode: self-consumption # Default mode for battery control, Inverter falls back to this mode after charging the battery or after stopping discharge. [self-consumption, time-of-use]
      port: 8080 # Port, optional
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      token: # Token, API Token (required for active battery control) (optional)
      maxchargepower: 3300 # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)
      cache: 1s # Cache, Time interval for data refresh (optional)