Volvo

To use with evcc, you need a Volvo account and a Volvo Connected Car API Key.

To do this, create a new application on the Account page and save the primary VCC API key.
Now publish your application and select the Scope permissions Connected Vehicle API: conve:vehicle-relation, conve:odometer-status, Energy API: energy:state:read.
You must enter the URL of your evcc instance as the redirect URL, e.g. https://evcc.example.org/providerauth/callback.
When adding the vehicle via the UI, an error message is displayed.
Open a new tab and go to the evcc configuration page. A button for logging in will appear in the top right menu.
Log in with your Volvo account and allow access to the data. If the authorization is successful, the vehicle can be added.

NOTE: Volvo enforces re-login every 7 days. Use "hamburger" menu logout/login.

Parametre

Navn	Beskrivelse	Niveau
`vccapikey`	VCC API Key from Volvo Developer App.	valgfri
`clientId`	Client ID from Volvo Developer App.	valgfri
`clientSecret`	Client Secret from Volvo Developer App.	valgfri
`redirectUri`	Redirect URI Redirect URI of your evcc instance. Must match the redirect URI set in your Volvo Developer App.	valgfri
`title`	Title Will be displayed in the user interface	valgfri
`capacity` [kWh]	Battery capacity Eksempel: `50`	valgfri
`vin`	Vehicle Identification Number If you own multiple vehicles from the same manufacturer Eksempel: `WF0FXX...`	valgfri
`icon`	Icon Will be displayed in the user interface Standard: `car`	avanceret
`phases`	Maximum number of phases Used to determine the minimum solar surplus and plan duration.	avanceret
`minCurrent` [A]	Minimum current The minimum current per connected phase that can be used Eksempel: `6`	avanceret
`maxCurrent` [A]	Maximum current The maximum current per connected phase that can be used Eksempel: `16`	avanceret
`maxPower` [W]	Maximum charging power hint Defines the maximum charging power of the vehicle. Helps improve charge plan accuracy when the vehicle typically uses less than the offered current or supports higher single-phase current compared to three-phase. The offered current of the loadpoint is not affected. Eksempel: `10000`	avanceret
`identifiers`	RFID identification Used to assign the vehicle to a loadpoint via RFID card. The identifier is shown on the loadpoint. Copy the value from there. Learn more.	avanceret
`priority`	Priority Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating surplus energy (higher values, higher priority).	avanceret
`climaterdisabled`	Disable climater detection Ignore the vehicle's climater state for charge control, so charging stops at the SoC or energy limit even when the vehicle signals an active climater request.	avanceret
`autodetectdisabled`	Exclude from auto detection Ignore the vehicle for auto detection of connected vehicles	avanceret
`wakeupdisabled`	Disable wake-up calls Do not send wake-up calls to the vehicle or charger, useful for vehicles that refuse to charge after repeated wake-ups.	avanceret

Konfigurationseksempel til evcc.yaml

Hvis du ikke vil konfigurere via webgrænsefladen, kan du i stedet bruge denne YAML-blok.

vehicles:
    - name: my_car
      type: template
      template: volvo-connected
      vccapikey: # VCC API Key, from [Volvo Developer App](https://developer.volvocars.com/).
      clientId: # Client ID, from [Volvo Developer App](https://developer.volvocars.com/).
      clientSecret: # Client Secret, from [Volvo Developer App](https://developer.volvocars.com/).
      redirectUri: # Redirect URI, Redirect URI of your evcc instance. Must match the redirect URI set in your Volvo Developer App.
      title: # Title, Will be displayed in the user interface (optional)
      capacity: 50 # Battery capacity (kWh), optional
      vin: WF0FXX... # Vehicle Identification Number, If you own multiple vehicles from the same manufacturer (optional)
      icon: car # Icon, Will be displayed in the user interface [car, bike, bus, moped, motorcycle, rocket, scooter, taxi, tractor, rickshaw, shuttle, van, airpurifier, battery, bulb, climate, coffeemaker, compute, cooking, cooler, desktop, device, dishwasher, dryer, floorlamp, generic, heater, heatexchange, heatpump, kettle, laundry, laundry2, machine, meter, microwave, pump, smartconsumer, tool, waterheater] (optional)
      phases: # Maximum number of phases, Used to determine the minimum solar surplus and plan duration. [1, 2, 3] (optional)
      minCurrent: 6 # Minimum current (A), The minimum current per connected phase that can be used (optional)
      maxCurrent: 16 # Maximum current (A), The maximum current per connected phase that can be used (optional)
      maxPower: 10000 # Maximum charging power hint (W), Defines the maximum charging power of the vehicle. Helps improve charge plan accuracy when the vehicle typically uses less than the offered current or supports higher single-phase current compared to three-phase. _The offered current of the loadpoint is not affected._ (optional)
      identifiers: # RFID identification, Used to assign the vehicle to a loadpoint via RFID card. The identifier is shown on the loadpoint. Copy the value from there. [Learn more.](https://docs.evcc.io/en/docs/features/vehicle) (optional)
      priority: # Priority, Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating surplus energy (higher values, higher priority). (optional)
      climaterdisabled: # Disable climater detection, Ignore the vehicle's climater state for charge control, so charging stops at the SoC or energy limit even when the vehicle signals an active climater request. (optional)
      autodetectdisabled: # Exclude from auto detection, Ignore the vehicle for auto detection of connected vehicles (optional)
      wakeupdisabled: # Disable wake-up calls, Do not send wake-up calls to the vehicle or charger, useful for vehicles that refuse to charge after repeated wake-ups. (optional)