ioBroker

← Solaire, batterie, réseau, compteurs

The rest-api adapter (not simple-api) must be installed on the ioBroker instance being used. It can be configured stand-alone or as an extension of a web adapter. The parameter webextension determines whether the adapter is configured as a web extension. Default is true, which means that the adapter is configured as a web extension. Authentication can only be performed using basic authentication. If no password is provided, no authentication will be performed. When specifying the entities for the individual measured values, ensure that they are correctly URL-encoded. For example, shelly.0.SHEM-3#8CAAB561991E#1.Total.ConsumedPower becomes shelly.0.SHEM-3%238CAAB561991E%231.Total.ConsumedPower

Domaines d’utilisation

Compteur avant réseau
Production solaire
Batterie
Compteur du chargeur

Paramètres

Nom	Description	Niveau
`uri`	The full uri of the host to query HTTP(S) address Exemple: `https://iobroker.homelab.lan:8082`	facultatif
`webextension`	Rest as web extension Determines whether the REST adapter is installed stand alone or as a web extension. Should 404 errors occur, try changing the value. Par défaut: `true`	facultatif
`user`	Username e.g. email address, user id, etc.	facultatif
`password`	Password Service account password	facultatif
`power` [W]	Power	facultatif
`soc` [%]	State of Charge	facultatif
`capacity` [kWh]	Battery capacity Exemple: `50`	facultatif
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Par défaut: `0` Exemple: `25`	facultatif
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Par défaut: `100` Exemple: `95`	facultatif
`cache`	Cache Time interval for data refresh Exemple: `5m`	avancé
`energy` [kWh]	Meter reading	avancé
`currentL1` [A]	L1 current	avancé
`currentL2` [A]	L2 current	avancé
`currentL3` [A]	L3 current	avancé
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power.	avancé
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.	avancé
`maxacpower` [W]	Maximum AC power of the hybrid inverter Par défaut: `0` Exemple: `5000`	avancé

Exemple de configuration pour evcc.yaml

Si vous ne souhaitez pas passer par l’interface, vous pouvez utiliser ce bloc YAML à la place.

Compteur avant réseauProduction solaireBatterieCompteur du chargeur

meters:
    - name: my_grid
      type: template
      template: iobroker
      usage: grid
      uri: https://iobroker.homelab.lan:8082 # The full uri of the host to query, HTTP(S) address
      webextension: true # Rest as web extension, Determines whether the REST adapter is installed  stand alone or as a web extension. Should 404 errors occur, try changing the value. (optional)
      user: # Username, e.g. email address, user id, etc. (optional)
      password: # Password, Service account password (optional)
      power: # Power (W), optional
      soc: # State of Charge (%), optional
      cache: 5m # Cache, Time interval for data refresh (optional)
      energy: # Meter reading (kWh), optional
      currentL1: # L1 current (A), optional
      currentL2: # L2 current (A), optional
      currentL3: # L3 current (A), optional

meters:
    - name: my_pv
      type: template
      template: iobroker
      usage: pv
      uri: https://iobroker.homelab.lan:8082 # The full uri of the host to query, HTTP(S) address
      webextension: true # Rest as web extension, Determines whether the REST adapter is installed  stand alone or as a web extension. Should 404 errors occur, try changing the value. (optional)
      user: # Username, e.g. email address, user id, etc. (optional)
      password: # Password, Service account password (optional)
      power: # Power (W), optional
      soc: # State of Charge (%), optional
      cache: 5m # Cache, Time interval for data refresh (optional)
      energy: # Meter reading (kWh), optional
      currentL1: # L1 current (A), optional
      currentL2: # L2 current (A), optional
      currentL3: # L3 current (A), optional
      maxacpower: 0 # Maximum AC power of the hybrid inverter (W), optional

meters:
    - name: my_battery
      type: template
      template: iobroker
      usage: battery
      uri: https://iobroker.homelab.lan:8082 # The full uri of the host to query, HTTP(S) address
      webextension: true # Rest as web extension, Determines whether the REST adapter is installed  stand alone or as a web extension. Should 404 errors occur, try changing the value. (optional)
      user: # Username, e.g. email address, user id, etc. (optional)
      password: # Password, Service account password (optional)
      power: # Power (W), optional
      soc: # State of Charge (%), optional
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      cache: 5m # Cache, Time interval for data refresh (optional)
      energy: # Meter reading (kWh), optional
      currentL1: # L1 current (A), optional
      currentL2: # L2 current (A), optional
      currentL3: # L3 current (A), optional
      maxchargepower: # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)

meters:
    - name: my_charger
      type: template
      template: iobroker
      usage: charge
      uri: https://iobroker.homelab.lan:8082 # The full uri of the host to query, HTTP(S) address
      webextension: true # Rest as web extension, Determines whether the REST adapter is installed  stand alone or as a web extension. Should 404 errors occur, try changing the value. (optional)
      user: # Username, e.g. email address, user id, etc. (optional)
      password: # Password, Service account password (optional)
      power: # Power (W), optional
      soc: # State of Charge (%), optional
      cache: 5m # Cache, Time interval for data refresh (optional)
      energy: # Meter reading (kWh), optional
      currentL1: # L1 current (A), optional
      currentL2: # L2 current (A), optional
      currentL3: # L3 current (A), optional