Sonnen sonnenBatterie

← Solaire, batterie, réseau, compteurs

For active battery control, the "JSON Write API" must be activated via the sonnenBatterie web interface (under Software-Integration) and the API token generated there must be entered in the battery configuration under token. The two operating modes supported for the sonnenBatterie are "self-consumption" (default) and "time-of-use". The mode can be adapted to the configuration of the sonnenBatterie via the 'defaultmode' parameter. The power for grid charging can be adapted to the inverter power of the sonnenBatterie via the maxchargepower parameter.

Fonctionnalités prises en charge

Pilotage de la batterie: Pilotage externe de la charge et de la décharge de la batterie domestique par evcc.

Domaines d’utilisation

Compteur avant réseau
Production solaire
Batterie

Paramètres

Nom	Description	Niveau
`host`	IP address or hostname Exemple: `192.0.2.2`	facultatif
`defaultmode`	Default mode for battery control Inverter falls back to this mode after charging the battery or after stopping discharge. Par défaut: `self-consumption`	facultatif
`port`	Port Par défaut: `8080`	facultatif
`capacity` [kWh]	Battery capacity Exemple: `50`	facultatif
`minsoc` [%]	Minimum charge Lower limit as configured on the battery system. Used by optimizer. Par défaut: `0` Exemple: `25`	facultatif
`maxsoc` [%]	Maximum charge Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. Par défaut: `100` Exemple: `95`	facultatif
`token`	Token API Token (required for active battery control)	facultatif
`maxchargepower` [W]	Maximum charge power Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. Par défaut: `3300`	avancé
`maxdischargepower` [W]	Maximum discharge power Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging.	avancé
`cache`	Cache Time interval for data refresh Par défaut: `1s` Exemple: `5m`	avancé

Exemple de configuration pour evcc.yaml

Si vous ne souhaitez pas passer par l’interface, vous pouvez utiliser ce bloc YAML à la place.

Compteur avant réseauProduction solaireBatterie

meters:
    - name: my_grid
      type: template
      template: sonnenbatterie
      usage: grid
      host: 192.0.2.2 # IP address or hostname
      port: 8080 # Port, optional
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_pv
      type: template
      template: sonnenbatterie
      usage: pv
      host: 192.0.2.2 # IP address or hostname
      port: 8080 # Port, optional
      cache: 1s # Cache, Time interval for data refresh (optional)

meters:
    - name: my_battery
      type: template
      template: sonnenbatterie
      usage: battery
      host: 192.0.2.2 # IP address or hostname
      defaultmode: self-consumption # Default mode for battery control, Inverter falls back to this mode after charging the battery or after stopping discharge. [self-consumption, time-of-use]
      port: 8080 # Port, optional
      capacity: 50 # Battery capacity (kWh), optional
      minsoc: 0 # Minimum charge (%), Lower limit as configured on the battery system. Used by optimizer. (optional)
      maxsoc: 100 # Maximum charge (%), Upper limit as configured on the battery system. Used by optimizer and, on some devices, for grid charging. (optional)
      token: # Token, API Token (required for active battery control) (optional)
      maxchargepower: 3300 # Maximum charge power (W), Highest power the battery system can charge with. The optimizer plans with charging up to this power. Some devices also use it as grid charging power. (optional)
      maxdischargepower: # Maximum discharge power (W), Highest power the battery system can discharge with. The optimizer plans with discharging up to this power. Smart mode assumes the battery supplies at most this power to vehicle charging. (optional)
      cache: 1s # Cache, Time interval for data refresh (optional)