Tibber

← Véhicules

Cette page affiche la version nightly. Passez à la version stable.

Reads vehicle data (state of charge, range) via the official Tibber Data API. Requires an OAuth2 client (client id and secret) created at https://data-api.tibber.com/clients/manage. Register the redirect URI shown below when creating the client. A Tibber energy contract is not required, the vehicle must be connected in the Tibber account.

Paramètres

Nom	Description	Valeur	Niveau
clientid	Client ID		facultatif
clientsecret	Client Secret		facultatif
redirecturi	Redirect URI Redirect URI of the evcc instance. Must match the redirect URI set in the Tibber Data API client.		facultatif
title	Title Will be displayed in the user interface		facultatif
capacity [kWh]	Battery capacity Exemple: 50		facultatif
vin	Vehicle Identification Number Optional, selects the vehicle when the account has more than one. Exemple: WVW...		facultatif
icon	Icon Will be displayed in the user interface Par défaut: car	carbikebusmopedmotorcyclerocketscootertaxitractorrickshawshuttlevanairpurifierbatterybulbclimatecoffeemakercomputecookingcoolerdesktopdevicedishwasherdryerfloorlampgenericheaterheatexchangeheatpumpkettlelaundrylaundry2machinemetermicrowavepumpsmartconsumertoolwaterheater	avancé
phases	Maximum number of phases Used to determine the minimum solar surplus and plan duration.	123	avancé
minCurrent [A]	Minimum current The minimum current per connected phase that can be used Exemple: 6		avancé
maxCurrent [A]	Maximum current The maximum current per connected phase that can be used Exemple: 16		avancé
maxPower [W]	Maximum charging power hint Defines the maximum charging power of the vehicle. Helps improve charge plan accuracy when the vehicle typically uses less than the offered current or supports higher single-phase current compared to three-phase. The offered current of the loadpoint is not affected. Exemple: 10000		avancé
identifiers	RFID identification Used to assign the vehicle to a loadpoint via RFID card. The identifier is shown on the loadpoint. Copy the value from there. Learn more.		avancé
priority	Priority Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating surplus energy (higher values, higher priority).		avancé
climaterdisabled	Disable climater detection Ignore the vehicle's climater state for charge control, so charging stops at the SoC or energy limit even when the vehicle signals an active climater request.		avancé
autodetectdisabled	Exclude from auto detection Ignore the vehicle for auto detection of connected vehicles		avancé
wakeupdisabled	Disable wake-up calls Do not send wake-up calls to the vehicle or charger, useful for vehicles that refuse to charge after repeated wake-ups.		avancé
welcomecharge	Charge on connection Charger will enable charging for short time when vehicle is connected, irrespective of configured charge mode. This is useful for vehicles that require power supply when connecting.		avancé
cache	Cache Time interval for data refresh Par défaut: 15m Exemple: 5m		avancé

Exemple de configuration pour evcc.yaml

Si vous ne souhaitez pas passer par l’interface, vous pouvez utiliser ce bloc YAML à la place.

vehicles:
    - name: my_car
      type: template
      template: tibber
      clientid: # Client ID
      clientsecret: # Client Secret
      redirecturi: # Redirect URI, Redirect URI of the evcc instance. Must match the redirect URI set in the Tibber Data API client.
      title: # Title, Will be displayed in the user interface (optional)
      capacity: 50 # Battery capacity (kWh), optional
      vin: WVW... # Vehicle Identification Number, Optional, selects the vehicle when the account has more than one. (optional)
      icon: car # Icon, Will be displayed in the user interface [car, bike, bus, moped, motorcycle, rocket, scooter, taxi, tractor, rickshaw, shuttle, van, airpurifier, battery, bulb, climate, coffeemaker, compute, cooking, cooler, desktop, device, dishwasher, dryer, floorlamp, generic, heater, heatexchange, heatpump, kettle, laundry, laundry2, machine, meter, microwave, pump, smartconsumer, tool, waterheater] (optional)
      phases: # Maximum number of phases, Used to determine the minimum solar surplus and plan duration. [1, 2, 3] (optional)
      minCurrent: 6 # Minimum current (A), The minimum current per connected phase that can be used (optional)
      maxCurrent: 16 # Maximum current (A), The maximum current per connected phase that can be used (optional)
      maxPower: 10000 # Maximum charging power hint (W), Defines the maximum charging power of the vehicle. Helps improve charge plan accuracy when the vehicle typically uses less than the offered current or supports higher single-phase current compared to three-phase. _The offered current of the loadpoint is not affected._ (optional)
      identifiers: # RFID identification, Used to assign the vehicle to a loadpoint via RFID card. The identifier is shown on the loadpoint. Copy the value from there. [Learn more.](https://docs.evcc.io/en/docs/features/vehicle) (optional)
      priority: # Priority, Priority of the loadpoint or vehicle in relation to other loadpoints or vehicles for allocating surplus energy (higher values, higher priority). (optional)
      climaterdisabled: # Disable climater detection, Ignore the vehicle's climater state for charge control, so charging stops at the SoC or energy limit even when the vehicle signals an active climater request. (optional)
      autodetectdisabled: # Exclude from auto detection, Ignore the vehicle for auto detection of connected vehicles (optional)
      wakeupdisabled: # Disable wake-up calls, Do not send wake-up calls to the vehicle or charger, useful for vehicles that refuse to charge after repeated wake-ups. (optional)
      welcomecharge: # Charge on connection, Charger will enable charging for short time when vehicle is connected, irrespective of configured charge mode. This is useful for vehicles that require power supply when connecting. (optional)
      cache: 15m # Cache, Time interval for data refresh (optional)